Machine as showed.This model adopts gantry structure,transversal span: 4m, 5m, 6m, 8m and so on.
Dual drive
Stable running,good Configuration,high work efficiency
Can be applied in cutting carbon steel,Mn-steel,stainless steel and so on.
It can add additional cutting torches,or configurate both abnormality cutting &Strip cutting according to User Requirement.
Auto Capacitive height control for flame cutting or Arc voltage height control for plasma cutting can also be configurated.
Cross Beam Length(X axis)
|
4m (can be lengthened according to user's demand)
|
Longitudinal Rail Length(Y axis)
|
6m (Rail can be lengthened according to user's demand)
|
Effective Cutting Width (X axis)
|
3.2m
|
Effective Cutting Length (Y axis)
|
4.8m
|
Cutting Mode
|
Flame/Plasma/Both Flame&Plasma
|
Drive Mode
|
Bilateral-side
|
Drive Method
|
Rack and pinion drive for X and Y axes
|
Flame Cutting Thickness
|
5-200mm
|
Plasma Cutting Thickness
|
1-60mm (depend on plasma power source)
|
Cutting Speed
|
0-3500mm per minute
|
Moving Precision
|
0.01mm per step
|
Power Source
|
220V 50Hz 500-1000W
|
Nesting Software (option)
|
INTERGNPS, FASTCAM
|
Cutting Gas
|
Acetylene, Propane&Oxygen
|
Plasma Gas
|
Pressed air, Oxygen, N2
|
Marking Tool
|
|
Torch Height Control System
|
CHC600
|
Auto Capacitive height control for flame cutting
|
|
PHC330
|
Auto Arc voltage height control for plasma cutting
|